How to measure a rigid box
Box sizes are always written length × width × height. The step people miss is saying whether those numbers are the inside or the outside of the box.
Length, width, height
- Length is the longer side of the opening.
- Width is the shorter side of the opening.
- Height (or depth) runs from the bottom of the box to the top edge of the wall.
Look down into the open box: length and width are the two sides you see, and height is how deep it is.
Inside size or outside size
Inside size is the space available for the product. Use it when the box must fit something: measure the product, then add clearance.
Outside size is the finished box including the board. Use it when the box must fit somewhere, such as a shipping carton or a shelf.
The two differ by the board. With 2 mm greyboard, the outside length and width are 4 mm larger than the inside, because there is a wall on each side. The outside height is 2 mm larger, because only the bottom panel adds thickness.
How much clearance to add
For a product that should sit snugly, add 1 to 2 mm to its length and width and 1 to 2 mm to its height. Add more for soft items, items in a tray or foam insert, or anything wrapped in tissue. Measure the product at its widest points, including caps, handles and labels.
Measuring a lid
On a two piece rigid box the lid slides over the base, so its inside size is the base outside size plus a small gap on each side. The lid wall height is measured the same way as the base height. A lid that is shorter than the base leaves a band of the base showing, which many brands use as a design feature.
Measuring an existing box
- Measure inside the base from wall to wall for length and width.
- Measure inside from the bottom to the top edge for height.
- Measure the board thickness at the top edge of a wall with a caliper, or a ruler if that is all you have.
- Measure the outside height of the lid wall.
Enter those numbers in the two piece rigid box dieline tool with "Inside size" selected, and it draws the board and wrap paper for you.