Two piece rigid box dieline
Free dieline template for lid and base (top-bottom) rigid boxes. The drawing updates as you type.
Drag to rotate. Scroll or pinch to zoom. Sizes are true to the dieline.
| Part | Flat cut size (mm) | Finished size (mm) | Prints 1:1 on |
|---|
Need this box made?
Nivaraprint prints and manufactures boxes. Send this exact box for a quote. Your size, board and paper are added to the message for you.
How to use this rigid box dieline
A two piece rigid box has a base and a lid, each made from greyboard and covered with printed wrap paper. This tool draws all four parts: base board, base wrap, lid board and lid wrap.
Cut the board on the red lines and score it on the blue dashed lines. Fold the walls up, fix the corners, then wrap each part with its paper. Glue the long sides first so the corner ears wrap round the corners, then the short sides, and turn the paper into the box.
Print the PDF at 100% and measure the 50 mm check bar before cutting. Make one sample before a production run.
New to this? Read how to measure a rigid box and turn-in, bleed and lid clearance explained.
Common questions
Is the size I enter inside or outside?
You choose. Inside size is the space for your product in the base. Outside size is the finished base including the board. The lid is always sized to fit over the base.
How much lid clearance should I use?
About 1 mm per side on the board suits most wrap papers and gives a smooth slide. Use less for a tighter fit with thin paper, and more if the paper is laminated or heavily glued. The fit check under the inputs estimates the free gap for your paper weight.
What turn-in should I use?
15 mm is a common turn-in for 2 mm board. It must be shorter than the inside wall height, so reduce it for shallow lids.
Can I open the file in Illustrator or CorelDRAW?
Yes. The SVG opens in both with cut, score and bleed lines in separate groups and colours. The PDF is at 1:1 scale for printing and checking.
Is the dieline ready for production?
It is drawn to your numbers with standard allowances, but board, paper and machines vary. Make one sample and adjust clearance or turn-in before a production run.