What is a dieline template?
A dieline template is the flat outline of a package. It shows where the material is cut, where it folds and how far the artwork must extend.
What the lines mean
- Cut line. The outer edge of the piece. The cutting die or blade follows this line. On this site it is drawn as a solid red line.
- Score or fold line. Where the material bends. Board is scored or V-grooved here, and paper is folded. It is drawn as a dashed blue line.
- Bleed line. How far printed artwork should run past the cut line, so no unprinted edge shows if the cut is slightly off. It is drawn as a dotted green line, usually 3 mm outside the cut.
Why it has to match the material
A dieline is specific to the box size and to the material thickness. A rigid box in 2 mm greyboard needs different panel sizes from the same box in 1.5 mm board, because each wall adds its thickness to the outside size. The lid must also be slightly larger than the base so it slides on.
Rigid boxes need two dielines per part: one for the board and one for the wrap paper. The paper dieline is larger, because the paper covers the outside walls and turns in over the top edge.
How a dieline is used
- The designer places artwork on the dieline, keeping text inside the panels and extending backgrounds to the bleed line.
- The printer prints the sheet with the dieline switched off or on a separate layer.
- The die maker builds a cutting die from the cut and score lines, or a plotter cuts samples straight from the file.
- The cut pieces are folded and glued into the finished box.
Make one for your box
You can draw a dieline by hand in Illustrator or CorelDRAW, or generate one from your box size. The two piece rigid box dieline tool draws the board and wrap paper for a lid and base box and exports them as PDF or SVG.