Reverse tuck end box dieline

Free dieline template for reverse tuck end (RTE) cartons, the most widely used mono carton for pharma, cosmetics and small goods.

Carton size

Length is the front panel, width is the side panel (depth), height is the standing height. Sizes are measured crease to crease.

Closure style

Flaps and print
CutCrease (score) lineBleed: artwork extends to here
      Cut list
      PartFlat cut size (mm)Finished size (mm)Prints 1:1 on

      Need this made?

      Nivaraprint makes rigid boxes, mono cartons and luxury boxes in Mumbai. Send this exact job for a quote. Your sizes and options are added to the message for you.

      How to use this reverse tuck end dieline

      On a reverse tuck end carton the top closure hinges from the back panel and the bottom closure from the front panel, so the two tucks face opposite ways. Blanks nest closely on the sheet, which makes this the most economical tuck carton.

      Each end has two dust flaps that fold in first, then the closure panel with its tuck flap. Only the side seam is glued.

      If you want the front panel free of cut edges, use a straight tuck end. If the product is heavy, use a snap lock bottom so the base cannot push open.

      Sizes are crease to crease. Print at 100%, check the 50 mm bar, and fold one plain sample before making a die.

      Common questions

      What is a reverse tuck end box used for?

      Light products packed by hand or on simple machines: medicines, tubes, cosmetics, small electronics and spare parts.

      Why is reverse tuck cheaper than straight tuck?

      Because the closures are on opposite panels, two blanks fit together head to tail on the print sheet with less waste.

      How long should the tuck flap be?

      12 to 20 mm suits most cartons. Under 10 mm can pull out easily.

      Can I open the file in Illustrator or CorelDRAW?

      Yes. The SVG opens in both with cut, score and bleed lines in separate groups and colours. The PDF is at 1:1 scale for printing and checking.

      Is the dieline ready for production?

      It is drawn to your numbers with standard allowances, but board, paper and machines vary. Make one plain sample and adjust before a production run.

      More free dieline tools