Snap lock bottom box dieline
Free dieline template for tuck top cartons with a snap lock bottom, also called a 1-2-3 bottom. The base locks by hand and needs no glue.
Drag to rotate, including underneath. Scroll or pinch to zoom. Use the sliders to open and close the carton. Sizes are true to the dieline.
| Part | Flat cut size (mm) | Finished size (mm) | Prints 1:1 on |
|---|
Need this made?
Nivaraprint makes rigid boxes, mono cartons and luxury boxes in Mumbai. Send this exact job for a quote. Your sizes and options are added to the message for you.
How to use this snap lock bottom dieline
A snap lock bottom has four flaps that lock together in three moves, which is where the name 1-2-3 bottom comes from. Fold the back flap in first, then the two side flaps, then push the tongue of the front flap into the slot.
The locked base carries more weight than a tuck end, so this style is used for bottles, jars, candles and other heavy or fragile products. The top is a normal tuck with two dust flaps.
Lock shapes differ between die makers. Treat the bottom flaps here as a starting layout, cut one plain sample and test the lock before you print. In the 3D preview, use Open bottom and View from below to see how the flaps close.
For light products a reverse tuck end carton is cheaper. The folding carton styles guide compares all four.
Common questions
What is the box with a manual locking bottom called?
A snap lock bottom carton, also known as a 1-2-3 bottom or tuck top snap lock bottom (TTSLB). The bottom flaps are locked by hand when the box is set up.
Is a snap lock bottom the same as a crash lock bottom?
No. A crash lock (auto) bottom is pre-glued and pops into place when the carton is opened. A snap lock bottom has no glue and is folded shut by hand. This tool draws the snap lock version.
How much weight can a snap lock bottom hold?
It depends on the board and the carton size. It is the usual choice when a tuck end bottom might push open, for example with bottles and jars. Test with your own product before a production run.
Why does the tool ask for at least 40 mm length?
The locking tongue is half the length of the front panel. Below 40 mm it becomes too narrow to hold.
Can I open the file in Illustrator or CorelDRAW?
Yes. The SVG opens in both with cut, score and bleed lines in separate groups and colours. The PDF is at 1:1 scale for printing and checking.
Is the dieline ready for production?
It is drawn to your numbers with standard allowances, but board, paper and machines vary. Make one plain sample and adjust before a production run.