Folding carton dieline
Free dieline template for folding cartons (mono cartons) in paperboard. Pick a closure style and the blank redraws as you type.
Drag to rotate, including underneath. Scroll or pinch to zoom. Use the sliders to open and close the carton. Sizes are true to the dieline.
| Part | Flat cut size (mm) | Finished size (mm) | Prints 1:1 on |
|---|
Need this made?
Nivaraprint makes rigid boxes, mono cartons and luxury boxes in Mumbai. Send this exact job for a quote. Your sizes and options are added to the message for you.
How to use this folding carton dieline
A folding carton is cut from one sheet of paperboard, creased, and glued along one side seam. It ships flat and is opened up for packing. This tool draws the whole blank with the four body panels, the glue flap and the top and bottom closures.
Sizes are length × width × height, measured crease to crease. Length is the front panel, width is the side panel, and height is the standing height. Allow 1 to 2 mm more than the product in each direction.
Choose from four closures: seal end (the cereal box), straight tuck end, reverse tuck end and snap lock bottom. The folding carton styles guide explains when to use each.
Artwork must extend to the green bleed line. Print the PDF at 100%, measure the 50 mm check bar, and fold one plain sample before making a die.
Common questions
What is a mono carton?
Mono carton is the name used in India and some other markets for a folding carton: a box made from a single layer of paperboard, printed, die cut, creased and glued on one seam.
Which closure style should I choose?
Reverse tuck end is the most economical for light products. Straight tuck end gives a cleaner front. Snap lock bottom carries heavier products such as bottles and jars. Seal end is for machine packed goods like cereal.
What board should I use?
300 to 350 gsm paperboard (SBS, FBB or duplex) suits most small and medium cartons. Go to 400 gsm for large or heavy packs.
How wide should the glue flap be?
12 to 20 mm is usual. Under 10 mm is hard to glue reliably, and the flap must be narrower than the side panel it glues to.
Can I open the file in Illustrator or CorelDRAW?
Yes. The SVG opens in both with cut, score and bleed lines in separate groups and colours. The PDF is at 1:1 scale for printing and checking.
Is the dieline ready for production?
It is drawn to your numbers with standard allowances, but board, paper and machines vary. Make one plain sample and adjust before a production run.