Cereal box dieline

Free dieline template for a cereal box. In the trade this style is called a seal end carton: both ends close with glued flaps.

Carton size

Length is the front panel, width is the side panel (depth), height is the standing height. Sizes are measured crease to crease.

Closure style

Flaps and print
CutCrease (score) lineBleed: artwork extends to here
      Cut list
      PartFlat cut size (mm)Finished size (mm)Prints 1:1 on

      Need this made?

      Nivaraprint makes rigid boxes, mono cartons and luxury boxes in Mumbai. Send this exact job for a quote. Your sizes and options are added to the message for you.

      How to use this cereal box dieline

      A cereal box is a seal end carton. It has four body panels, a glue flap on the side seam, and four flaps at each end: two inner flaps that fold in first and two full seal flaps that are glued over them.

      The example opens at 7.5 × 2.5 × 11 inch, a common family cereal box. Enter your own length (front panel), width (side panel) and height. Sizes are crease to crease.

      Seal end cartons are normally filled and glued on a machine. If you will pack by hand, a straight tuck end or reverse tuck end carton is easier, because it closes without glue.

      Artwork must extend to the green bleed line. Print at 100%, check the 50 mm bar, and fold one plain sample first. See the folding carton styles guide for the other closures.

      Common questions

      What is the industry name for a cereal box?

      Seal End Carton, often shortened to SEC. It is also called a seal end box or glued end carton.

      What size is a standard cereal box?

      There is no single standard, but a family size box is around 7.5 × 2.5 × 11 inch (190 × 63 × 280 mm). Single serve boxes are much smaller. Enter the size your product needs.

      What board is a cereal box made from?

      Usually coated recycled board (duplex or CRB) or folding box board of about 350 to 450 gsm for a family size pack.

      Can I make a school project cereal box from this?

      Yes. Print the PDF across the pages your printer allows, or scale it down, cut on the red line, fold on the blue dashed lines and glue the side flap first.

      Can I open the file in Illustrator or CorelDRAW?

      Yes. The SVG opens in both with cut, score and bleed lines in separate groups and colours. The PDF is at 1:1 scale for printing and checking.

      Is the dieline ready for production?

      It is drawn to your numbers with standard allowances, but board, paper and machines vary. Make one plain sample and adjust before a production run.

      More free dieline tools